Danh mục sản phẩm
Dịch vụ
Nhà sản xuất
Que hàn Tig Kobelco TGS-308L ER308L đường kính Ф 2.4 dài 1000 mm hàn thép inox 308L
| Mã sản phẩm : | ER308L |
| Xuất xứ : | Khác |
| Nhà sản xuất : | Đang cập nhật |
| Tình trạng : | Có hàng |
| Trọng lượng : | Đang cập nhật |
| Bảo hành : | Đang cập nhật |
| Giá sản phẩm : | Liên hệ |
Que hàn Tig Kobelco TGS-308L ER308L đường kính Ф 2.4 dài 1000 mm hàn thép inox 308L
6434440059 - TIG WELDING RODS DIAMETER :2.4 MM LENGTH :- ADDITIONAL INFORMATION :ER308L OLD_MAXIMO_REF_NO :028555
Class: ER308L
AWS: A5.9
Conforms to Certification: AWS A5.9 ASME SFA A5.9
Weld Process Used for Tig (GTAW)
AWS Chemical Composition Requirements
C = 0.03 max
Cr = 19.5 – 22.0
Ni = 9.0 – 11.0
Mo = 0.75 max
Mn = 1.0 – 2.5
Si = 0.30 – 0.65
P = 0.03 max
S = 0.03 max
Cu = 0.75 max
Available Sizes
.030 x 36
.035 x 36
.045 x 36
1/16 x 36
3/32 x 36
1/8 x 36
3/16 x 36
5/32 x 36
Application
ER308L has the same analysis as type 308 except the carbon content has been held to a maximum of .03% to reduce the possibility of intergranular carbide precipitation. ER308L is ideal for welding Types 304L, 321, and 347 stainless steels. This is a suitable wire for applications at cryogenic temperatures.
| Deposited Chemical Composition % (Typical) | ||
| C = 0.02 | Si = 0.32 | Mn = 1.70 |
| P = 0.011 | S = 0.009 | Cr = 20.0 |
| Ni = 10 | ||
| Mechanical Properties (R.T.) | |
| Yield Strength | 57,000 psi |
| Tensile Strength | 87,000 psi |
| Elongation | 34% |
| Reduction of Area | 56% |
Deposited All Weld Metal Properties
Data is typical for ER308L weld metal deposited by Tig using 100% Argon as the shielding gas.
| Recommended Welding Parameters | |||
| GTAW “Tig Process” | |||
| Wire Diameter | Amps DCSP | Volts | Shielding Gas |
| .035 | 60-90 | 12-15 | Argon 100% |
| .045 | 80-110 | 13-16 | Argon 100% |
| 1/16 | 90-130 | 14-16 | Argon 100% |
| 3/32 | 120-175 | 15-20 | Argon 100% |
Note: Parameters for tig welding are dependent upon plate thickness and welding position.
Other shielding Gases may be used for Tig welding. Shielding gases are chosen taking Quality, Cost, and Operability into consideration.
Product Description
ER-308L
High-Performance Stainless Steel TIG Welding Rod: ER308L
- AWS: A5.9 Grade
- Class: ER 308L
Available Diameters: .035", .045", 1/16", 3/32" & 1/8"
Length: 36" (914mm)
Weight: 1 lb. Pack
Approximate number of rods per 1 lb. pack for each diameter:
- .035" (0.89mm): 50 - 54
- .045" (1.14mm): 36 - 40
- 1/16" (1.6mm): 26 - 30
- 3/32" (2.4mm): 12 - 16
- 1/8" (3.2mm): 8 - 10
(Rods per pack is an approximate and varies on metal type)
ER308L AWS A5.9 CLASS ER 308L
ER308L is similar to 308 but contains an average .02% carbon producing a
weld deposit with good resistance against intergranular corrosion caused by
carbide precipitation. 308L is commonly used for welding AISI types 304L,
308L, 321 and 347.
Tùy chọn mua hàng
Hỗ trợ trực tuyến
: Zalo 0924.263.999
Skype:
